Our Aluminum Fixture Plate is designed to be used with a 6" mill vice and repeatable within .001" or less depending upon condition of vice. Easily remove plate from vice for new set up or to fixture a new part on the plate, and then return plate to vice (without use of parallels or stops) and plate repeats to same zero point as before.  1 1/4" thick aluminum plate makes for rigid setups. Our plate is finished on all sides allowing them to be used for squaring of parts. The fixture plate features two milled sections on the bottom side for mounting and locating on the top of mill vice jaws. 92 holes are tapped with 5/16"-18 threads provide ample clamping and fixturing possibilities. Each of the 92 holes are also counterbored to .3755" allowing for extremely accurate locating and stop setting using 3/8" pins. Included with fixture plate are six 3/8"x5/8" dowel pins for use as stops and locating pins.  Proudly made in the U.S.A.

6"x12"x1.25" Aluminum Fixture Plate

$140.00Price
    • 6061 T6 Aluminum
    • 6"x12"
    • 1.25" Thickness (nominal)
    • Ninety-two  5/16-18 Tapped holes, Counter Bored to  0.3755"
    • 2.5"x2.5" nominal fixturing space in center for small parts. without pin-hole interference.
    • Includes six 3/8" x 5/8" dowel pins for locating.
    • For use with 6" mill vice.
  • Returns accepted up to 5 days after delivery. No returns on products that show signs of negligent/excessive use or damage by buyer. Buyer must pay S&H on returns.

BRUNNER INDUSTRIES LLC

Contact:

Phone: (505) 753-0033